At Quincy, the QT compressor was built according to the highest quality standards in the industry, so you can count on it to be up and running when you need it. The QT has the best cfm per brake horsepower on the market.

Available in 3-30 horsepower, the QT is a rugged, cast iron, two-stage compressor for commercial and industrial applications up to 175 psig. Using such state-of-the-art manufacturing techniques as computer-aided design and computer-controlled machine tools, each QT is built for quality, reliability, and economy. All components are accessible, moving parts are kept to a minimum, and horsepower goes directly into air production.

The QT is simply a more reliable compressor. Unlike many compressor products, Quincy compressors are 100% manufactured and assembled in the United States. Quincy has been engineering and designing dependable, efficient air compressors since 1920, and today, nearly two million compressors later, it's clear that Quincy is still setting new standards of quality.

So when there's no time for downtime, call Air Perfection and we'll introduce you to the Quincy-QT and show you just how good a good compressor can be.

What makes it better? - Inside the QT®

Standard features

• Heavy-duty cast iron crankcase and cylinders with ductile iron crankshaft
• ODP motor or Kohler engine
• ASME-coded receiver
• Two-piece connecting rods
• High-efficiency intercoolers
• Splash-lubricated system
• Replaceable stainless steel valves
• Non-asbestos gaskets
• ASME-coded relief valves in the interstage, discharge line, and receiver tank
• Bayonet-type oil gauge
• Industrial air filters
• Pressure gauge and service valve
• Pressure switch (on electric tank-mounted units)
• Loadless auto stop/start, 3 to 7.5 hp (tank-mounted units)
• Dual control with suction valve unloading (tank-mounted simplex 10-30 hp units)
• Totally enclosed belt guard

Options

• 208/230/460 mounted and wired full-voltage starters
• TEFC motors
• Special voltage motors
• Heavy-duty filter silencers
• Factory-installed air or water cooled aftercoolers
• Electronic drain valve
• Quin-Cip® lubricant
• Foot operated drain valve
• Vibration isolators
• Duplex control panels
• Low oil level shutdown
• Dual control (simplex 3 to 7.5 hp duplex and base mounted units)

Quality Features Performing Quality Functions - Sophisticated computer technology is used to ensure precision in Quincy products.

• The QT is not a throwaway compressor--it's completely rebuildable, so you can realize a return on your investment for many years to come.
• QT compressors are mounted on ASME-coded horizontal or vertical 200-psig air receivers.
• Standard equipment on tank mounted units includes an air pressure gauge, ASME safety valves, check valve, pressure switch, fully enclosed belt guard, service valve, manual tank drain, and industrial-duty air inlet filter.
• Belt guard meets OSHA standards.
• Fixed differential pressure switch set at 135/175 psig.
• Slotted receiver top plate for easy belt adjustment.
• Meets California 462L OSH A code requirements.
• Tri-voltage 208/230/460 motor up to 7.5 horsepower; dual 230/460 volt motor 10-30hp.
• Gas engine compressors with electric start.
• Loadless start, 3-7.5 hp.
• Dual control, 10-30 hp.
• All electrical components are UL approved.